PTFE Micropowder Manufacturer for Stable Industrial Formulations
Peflon supplies PTFE 미세분말 for coatings, plastics, and industrial additives.
helping manufacturers and distributors achieve consistent results across batches, projects, and long-term supply programs.
Custom grades and bulk supply available from China.
- Stable particle size for repeatable production results
- Comply with (EU) 2019/1021, FDA Approved.
- Particle Size： 0.1 – 25 μm
- PFOA Free,
What Is Peflon PTFE Micropowder
PTFE micro powder, also called micronized ptfe powder, is made by controlled degradation and micronization of PTFE resin, then precisely classified into a fine, free-flowing powder. It disperses into inks, coatings, plastics, elastomers, and lubricants. In coatings (powder, wood, coil), it lowers friction and boosts scratch and mar resistance.
- In printing inks, it increases rub and slip without dulling color.
- In engineering plastics like PA, PBT, and PP, small doses cut wear and noise in gears and clips.
- In greases and dry-film lube blends, PTFE micro powder gives long-lasting slip under heat and chemicals.
특징
- Low friction for easy slip and release
- High heat and chemical resistance
- Fine, uniform particles for fast dispersion
- Improves scratch, wear, and abrasion at low dosage
- Non-melting and non-migrating; stable in most binders
All Grade of PTFE Micropowder
Pelfon’s PTFE micro powder has many grades for different applications. Through molecular design and surface modification technologies, our PTFE micropowders address diverse material challenges with precision. They can blend with other materials and add content from < 1% to 20%, with different usage for different content.
| 등급 | D50 (μm) | Bulk Density (g/L) | Key Features | 일반적인 적용 사례 |
|---|---|---|---|---|
| PF-568 | 4.0–4.5 | 300–350 | Fine PTFE micropowder with good dispersion and gloss improvement. | Printing ink and ink-jet powder. |
| PF-575 | 20–25 | 400–500 | Coarse particle, strong wear resistance and sliding improvement. | Engineering plastics and elastomers. |
| PF-576 | 12–15 | 500–600 | Balanced particle size with wear resistance and friction reduction. | PA, POM, PBT, PC/ABS and modified plastics. |
| PF-578 | 5–6 | 400–500 | Uniform particle distribution with excellent lubrication and heat resistance. | Modified plastics and elastomers. |
| PF-583 | 2.5–3.5 | 200–300 | Very fine particle for suspension stability. | Lubricating oil systems. |
| PF-585 | 3–3.5 | 200–250 | Fine particle with low density for smooth dispersion. | Lubricating oil systems. |
| PF-588 | 0.1–0.4 | 250–300 | Ultra-fine grade for high-end lubrication, equivalent in performance to 3M’s 9207Z. | Special lubricant systems. |
| PF-595 | 4–5 | 250–550 | Wide-use grade with wear resistance and gloss improvement. | Plastics, inks, lubricants and elastomers. |
| PF-597 | 10–12 | 250–550 | Medium particle for friction and wear control. | Engineering plastics and rubber. |
| PF-598 | 4–5 | 250–550 | Balanced performance across lubrication and dispersion. | Plastics, coatings, inks and elastomers. |
| PF-599 | 3–4 | 250–550 | High whiteness, easy blending, strong lubrication. | Plastics, coatings, grease and elastomers. |
Why Choose Peflon PTFE Micropowder
Choosing PTFE 미세분말 is not about chasing performance claims.
It is about avoiding batch drift, re-testing, and supply surprises once production starts.
Peflon focuses on reducing these risks for distributors and manufacturers.
PTFE Micropowder Built to Control Raw Materia
If PTFE Micropowder varies, formulations drift and rework begins.
Peflon supplies PTFE Micropowder with defined particle size ranges to keep material behavior predictable.
-
Less formulation adjustment
-
Fewer batch-related issues
PTFE Micropowder Checked Before Shipment
Problems are usually found after delivery—when it is already late.
Peflon verifies key properties of PTFE Micropowder before release to support incoming inspection.
-
Particle size consistency checks
-
Clear material identification
FAQ of PTFE Micropowder
No. PTFE 미세분말 is used as a functional additive, while PTFE resin is used for molding or extrusion. They serve different purposes and are not interchangeable.
No. Although both are additives, PTFE 미세분말 and PTFE wax differ in molecular structure and behavior. PTFE Micropowder is typically selected when solid fluoropolymer characteristics are required.
Particle size selection depends on your formulation sensitivity and processing method. Fine grades are often evaluated for coatings, while larger particles are more common in plastics and compounds.
Dispersion issues are usually related to particle size choice, mixing method, or shear conditions rather than the PTFE Micropowder itself. Grade selection should match processing conditions.
In many cases, PTFE 미세분말 is evaluated to adjust surface behavior without redesigning the base formulation. However, testing is recommended before scale-up.
예, PTFE 미세분말 is commonly used in industrial production when particle size definition and material consistency are controlled.
Switching suppliers may require requalification, depending on particle size distribution and internal approval standards. Technical comparison is recommended before changeover
Related Fluoropolymers to PTFE Micropowder
Peflon Support for PTFE Micropowder
If you are unsure whether PTFE 미세분말 particle size or grade choice will affect your formulation approval or scale-up, this is the stage to talk to us.
Peflon provides technical input focused on grade selection, processing fit, and evaluation readiness—not theory.
Our support is commonly used when comparing micronized PTFE powder options, preparing internal reviews, or deciding whether a change will trigger requalification.
Contact Peflon before testing begins to avoid unnecessary trial rounds.
문의하기
If you are sourcing PTFE 미세분말 for evaluation, production, or distribution, this is the right place to start.
Use the form to share your application, particle size interest, or sourcing plan.
- 중국 저장성 취저우시 커청시
- +86 13957007557
- info@peflon.com