PTFE Anti-drip agent

N.º CAS: 9002-84-0

Solicitud

  • Electrical and electronic equipment
  • Automobile industry
  • Tejido arquitectónico
  • Fibers and textiles
 
Dispersión de PTFE

About PTFE Anti-drip agent

El alto contenido de sólidos y el pequeño tamaño de las partículas de las emulsiones de PTFE Peflon permiten formar recubrimientos más gruesos y lisos en una sola pasada, lo que aumenta la productividad. Sus excelentes propiedades de dispersión y humectación garantizan una adhesión uniforme a las fibras de vidrio y compatibilidad con otras dispersiones. Las dispersiones de PTFE Peflon tienen el mismo contenido de sólidos, sequedad y temperatura de sinterización que el teflón, lo que las convierte en un reemplazo directo y fácil del teflón.

Polvo

Pure powder anti-drip agent is pure polytetrafluoroethylene powder, pure powder anti-drip agent to use a good premise is how to solve the problem of dispersion, we will be sintered on the surface of the product, greatly increasing the fluidity and dispersion of the product.

dispersión de fep (1)

Emulsions

In the case of emulsion-type anti-drip agents, PTFE is dispersed in water by the action of some dispersants to form a suspended emulsion.

Excellent smoke suppression

Under combustion or high-temperature conditions, our PTFE effectively reduces the release of toxic gases, thus enhancing safety and environmental friendliness.

smoke (1)
libre de halógenos (1)

Halogen-free and non-toxic

Our PTFE Anti-Drip is Reach-tested, halogen-free, chlorine (Cl) and bromine (Br) free and meets EU standards.

Excellent thermal stabilityClick to apply

During combustion, PTFE effectively fibers and easily disperses into small particles for drip-proofing.

fire
dispersión de fep

No precipitation

The non-sedimentation nature of our PTFE anti-drip agents ensures that solid particles do not precipitate during storage and use, thus enhancing the overall performance and service life of the product.

Application of PTFE Anti-drip agent

PTFE anti-drip agents are widely used in a variety of fields due to their superior performance, enhancing the functionality and service life of products.

aislamiento eléctrico

Used in the manufacture of housings, insulating materials and wire and cable jackets for electronic products.

aerospace
Tejido arquitectónico

Used in aircraft and spacecraft interior materials, seat components, insulation materials, and other areas with very high flame retardancy requirements.

automobile

Used in automotive interiors, dashboards, seat materials, and electronic component housings.

tela
Fibers and textiles

Suitable for fireproof clothing, firefighting equipment and fireproof barrier curtains in buildings.

Productos relacionados

Líquido de teflón

N.º CAS: 9002-84-0 Tamaño medio de partícula: 0,2-0,4 μm PH: 8-10 Contenido de sólidos: 60 ±2% Aplicación: impregnación, revestimiento, control de polvo, aglutinante para baterías, aditivo antigoteo

resinas-ptfe.jpg

N.º CAS: 9002-84-0 Tamaño medio de partícula: 60-260 μm, Punto de fusión: 327 ± 5 ℃, Aplicación: Tubo, varilla, barra, lámina, placa, sellos

Resina PFA

N.º CAS: 26655-00-5 MFR: 0,8-30 g/10 min, Punto de fusión: 310 ℃, Temperatura de trabajo a largo plazo: 260 ℃, Aplicación: Revestimiento de tuberías, bombas, válvulas y tanques, alambres, cables, juntas, cojinetes, películas, semiconductores, etc.

Resina de PTFE en polvo fino

N.º CAS: 9002-84-0 Tamaño medio de partícula: 450-750 μm, Punto de fusión: 327 ± 5 ℃, Aplicación: Película, Tubo, Alambre y cable, Cinta de sellado de teflón, Cable coaxial, Manguera, Cinta aisladora, Manguitos

Pellets de PCTFE

N.º CAS: 9002-83-9 Temperatura de trabajo a largo plazo: -196 °C a 125 °C Aplicación: Láminas de tabletas, láminas, sellos, juntas, aeroespacial, médico, revestimientos de válvulas de nitrógeno líquido

N.º CAS: 25067-11-2 Punto de fusión: 213 °C Aplicación: revestimiento de válvulas, bombas y tuberías, cables, alambres, cables de chispa, cables de encendido, tuberías, tubos, películas, semiconductores

es_ESES

Solicite una cotización rápida

Nos pondremos en contacto con usted dentro de 1 día hábil, preste atención al correo electrónico con el sufijo “@peflon.com”

Solicite una cotización rápida

Nos pondremos en contacto con usted dentro de 1 día hábil, preste atención al correo electrónico con el sufijo “@peflon.com”