MoS₂ 충진 PTFE
페플론 MoS₂ PTFE — 몰리브덴 이황화물을 혼합하여 만든 복합재료로, ""고급 솔리드 윤활제의 왕"", PTFE로 변환. 초저마찰, 향상된 내마모성 및 강력한 기계적 성능을 제공합니다.
- 2020년 5월 10일 % 충전 옵션
- 초저마찰계수
- 더 높은 기계적 강도
- 향상된 크리프 저항성
MoS₂가 함유된 PTFE 충전재 함량
Peflon MoS₂ filled PTFE is supplied in three filler percentages to match specific performance needs — light wear enhancement through heavy-duty industrial service.
5% MoS₂ 충진 PTFE
PTFE 고유의 유연성과 낮은 마찰 특성을 유지하면서 내마모성을 향상시켜 가벼운 하중이 가해지는 용도에 이상적입니다.
10% MoS₂ 충진 PTFE
내마모성과 기계적 강도가 더욱 향상되어 고하중 슬라이딩 및 롤링 용도에 적합합니다.
20% MoS₂ 충진 PTFE
내마모성과 경도를 크게 향상시켜 최고의 내마모 성능이 요구되는 산업 분야에 적합합니다.
MoS₂ 충진 PTFE의 응용 분야
Peflon molybdenum-disulfide filled PTFE is used across a wide range of applications thanks to its excellent low friction, wear resistance and chemical inertness — supplied in four stock forms.
MoS₂ 충진 PTFE 막대
가공 부싱, 슬라이드 베어링 및 하중 지지 부품용 원통형 소재.
MoS₂ 충전 PTFE 시트
동적 압력 환경에서 사용되는 개스킷, 슬라이드 패드 및 라이너용 평판 소재.
MoS₂ 충전 PTFE 씰
펌프 및 압축기용 피스톤 링, 회전식 밀봉 장치 및 밸브 부품.
MoS₂ 충진 PTFE 어셈블리
정밀 가공된 하위 부품과 고객 도면에 따라 제작된 맞춤형 부품.
MoS₂ 충진 PTFE의 주요 특징
Molybdenum disulfide is one of the most effective solid lubricants known. Dispersed into the PTFE matrix it delivers five tangible improvements over unfilled PTFE — targeted at dynamic friction, wear, strength, creep and thermal stability.
- 낮은 마찰 계수 — MoS₂ is an effective solid lubricant — significantly reduces PTFE’s friction in sliding and rolling applications.
- 향상된 내마모성 — MoS₂ filling extends service life in high-wear environments.
- 향상된 기계적 강도 — Higher mechanical strength than pure PTFE — better durability in high-load service.
- 크리프 저항 — Slight but meaningful improvement in PTFE’s creep behavior under long-term loading.
- 우수한 열 안정성 — MoS₂ remains stable at elevated temperatures — usable over a wide thermal range.
MoS₂ Filled PTFE FAQ
What is MoS₂ filled PTFE?
MoS₂ filled PTFE is a filled-PTFE compound made by blending molybdenum disulfide (MoS₂) — a highly effective solid lubricant — into a PTFE matrix. The result keeps PTFE’s chemical inertness and low friction while adding wear resistance, higher mechanical strength and improved creep behavior, making it well suited to bushings, bearings, seals and other load-bearing parts.
Which fill percentage should I choose — 5%, 10% or 20%?
Choose 5% for light-load applications where you want added wear resistance but the most flexibility and lowest friction. Choose 10% for higher-load sliding and rolling service. Choose 20% when the part demands the highest wear resistance and hardness in heavy-duty industrial use. Send us your load, speed and temperature and we will recommend the grade.
How does MoS₂ filled PTFE compare to unfilled PTFE?
Compared with unfilled PTFE, MoS₂ filled PTFE offers a lower coefficient of friction in sliding and rolling contact, greater wear resistance, higher mechanical strength, slightly better creep resistance under long-term load, and good thermal stability — while retaining PTFE’s corrosion resistance.
What forms and shapes can you supply?
We supply MoS₂ filled PTFE as rod, sheet, finished seals (piston rings, rotary seals and valve components) and machined assemblies built to your drawing. Custom sizes and machined parts are available on request.
Do you offer free samples and OEM supply?
Yes. We provide free samples for qualification and support OEM / private-label supply. Contact our team with your specification, drawing or sample and we will match it.
기타 충전 PTFE 등급
유사한 성능 특성을 위한 다른 페플론 충전 PTFE 화합물로는 구조적 강성을 위한 유리, 전도성을 위한 탄소, 자체 윤활성을 위한 흑연, 경도를 위한 청동 등이 있습니다.
함께 새로운 프로젝트를 시작해 볼까요?
Whether you're interested in our MoS₂ filled PTFE, need a quote, or have any other requirements, we look forward to hearing from you. And you will get a perfect solution.