페플론 PEEK material is a semi-crystalline, high-performance thermoplastic that keeps strength and shape at heat, resists many chemicals, and absorbs little moisture—ideal for demanding OEM parts. Choose virgin PEEK material or reinforced grades like GF30 그리고 CF30/CA30, plus ESD variants and PEEK powder material for coatings or blends. You can apply PEEK material in aerospace brackets, e-drive components, semiconductor trays/fixtures, oil-and-gas tools, and electrical insulation such as magnet-wire systems. Peflon provides TDS, RoHS/REACH documentation and supports UL 94 V-0 at grade level, with batch traceability and process guidance from sampling to scale. With coordinated logistics and engineering reviews, you get a one-stop PEEK material supply path. Related terms: PEEK resin, glass-filled PEEK, carbon-filled PEEK, conductive PEEK, PAEK.
Request TDS & Bulk Quote to start your evaluation.
With Peflon PEEK material, you get a clear lineup by grade and form so sourcing is simple. The semi-crystalline PEEK material family offers clean machining, stable geometry, and broad chemical resistance. Pick a grade that fits your part target—mechanical, electrical, or surface behavior—and apply PEEK material in aerospace, e-drive, semiconductor tooling, and insulation parts.
Request TDS and a bulk quote.
Choose virgin PEEK material when you need balanced strength and neat surface finish without fillers. It suits precision housings, guides, and tooling that later need tight cosmetic control.
PEEK powder material enables thin protective films and tailored blends. It supports electrostatic spray, flame/thermal processes, and custom compounding for targeted surface behavior.
S-PEEK is a modified PEEK material used in ion-exchange and membrane research. It’s suitable for labs and pilots that explore specialty separation or energy devices.
PEEK material with 30% glass fiber improves rigidity and hole-to-hole stability. Use it for structural covers, fixtures, and mounting frames that must keep spacing under assembly stress.
Carbon-filled PEEK material boosts modulus-to-weight and helps pull heat away from hot spots. It fits wear rings, brackets, and frames where stiffness and quick heat spread matter.
Conductive PEEK material controls static to protect devices and maintain clean handling. Use it for carriers, sockets, trays, and nests near sensitive process steps.
Ceramic-filled PEEK material offers higher hardness and stable dielectric behavior for precision spacers and insulating supports
Our integrated program keeps your PEEK material projects moving—from NDA to steady state—without extra admin load.
NDA-protected file exchange and drawing reviews
Interchange mapping to legacy grades for faster approvals
Digital lot files (MFI/DSC snapshots) available on request
Multi-language support and port-to-port routing options
Dedicated PM contact for trials and ramp-up gates
Virgin PEEK material gives balanced strength and a clean surface. PEEK GF30 raises stiffness and hole-to-hole stability. PEEK CF30/CA30 improves modulus-to-weight and heat spread. Start with virgin PEEK material, then compare GF30 or CF30 against your drawing targets.
Keep PEEK material sealed until use. Dry only if exposed to humid air. Use a desiccant dryer and verify moisture with a quick check. Correct drying prevents splay, bubbles, and dimensional drift.
es. PEEK ESD material offers controlled surface resistivity for sensitive areas. Specify your target range and test method; we match a grade and provide verification data with the lot.
Yes. PEEK powder material works with electrostatic spray when parts are clean, grounded, and preheated as your process requires. Control particle size and airflow to build even films; run a small line trial to confirm settings.
PEEK는 강도와 열 안정성을 제공하며, PTFE는 내화학성과 낮은 마찰력이 뛰어납니다. 용도에 따라 선택하세요. PEEK는 최대 250°C(482°F), PTFE는 최대 260°C(500°F)의 내열성을 제공합니다.
PEEK는 극한 환경에 적합하고, 나일론은 가벼운 용도에 비용 효율적입니다.
PEEK는 기계적 성능과 생체적합성이 뛰어나고, PPS는 더 나은 내화학성과 비용 효율성을 제공합니다.
귀하가 제조업체이든 유통업체이든 무료 샘플이나 솔루션을 원하시면 Peflon에 문의하세요. Peflon은 원스톱 기술 솔루션을 제공합니다.
영업일 기준 1일 이내에 연락드리겠습니다. 이메일에 첨부된 연락처를 꼭 참고해주시기 바랍니다. “@페플론닷컴”.
영업일 기준 1일 이내에 연락드리겠습니다. 이메일에 첨부된 연락처를 꼭 참고해주시기 바랍니다. “@페플론닷컴”.
KO 
EN 
RU 
DE 
TR 
ES