PTFE rods are made from polytetrafluoroethylene (PTFE), a versatile material widely used in various industrial applications. The applications include the gas and oil industry, automotive sector, medical treatment, and chemical processing, among others.
Molded PTFE rods are made from molding PTFE powder.
Process: Molding Compression
Features:
Diameter 25mm-1000mm
Length:100m-300mm
Application: seals, gaskets, valve seats, and mechanical parts.
Extruded PTFE rods are made from PTFE Presintered Resin.
Process: Ram Extrusion
Features:
Diameter:1mm-200mm
Length:1000mm-2000mm
Application:bearings, sliders, bushings, and other mechanical parts.
Materials: 100% pure PTFE, without any fillers.
Features: Excellent chemical resistance, high-temperature resistance, low coefficient of friction, and good electrical insulation.
Applications: Commonly used in the food, medical, electronics, and chemical industries for scenarios requiring high purity and corrosion resistance.
Materials: 15-25% carbon fiber.
Feature: Improved electrical conductivity and abrasion resistance.
Applications: Widely used in bearings, sliding parts and applications requiring high strength and heat resistance.
Materials: 5-40% fiberglass.
Features: Increased mechanical strength and wear resistance.
Applications: Used in seals, gaskets, and bearings for high load and high temperature applications.
Materials: 40-60% bronze.
Feature: Increases mechanical strength, hardness, and thermal conductivity.
Applications: Suitable for plain bearings, valve seats, and high friction, high-temperature applications.
Materials: 5-15% graphite.
Features: Enhanced thermal conductivity and anti-static properties.
Applications: Suitable for valve seats, piston rings, bearings, and other parts requiring low friction and self-lubrication.
PTFE Rods are used in many applications due to their excellent chemical stability, high and low temperature resistance, low coefficient of friction, and electrical insulation properties.
Used for lining chemical pipes and joints to prevent chemical corrosion.
Such as valve seat and stem seal rings for corrosion resistance and high temperature operation.
CAS No: 9002-84-0 Average particle size: 0.2-0.4μm PH: 8-10 Solid Content: 60 ±2% Application: impregnating, Coating, Dust Control, Binder for battery, Anti-drip additive
CAS No: 9002-84-0 Average particle size: 60-260 μm, Melt Point: 327±5℃, Application: Tube, Rod, Bar, Sheet, Plate, Seals
CAS No: 26655-00-5 MFR: 0.8-30 g/10 min, Melt Point: 310 ℃, Long-term working temperature: 260℃，Application: Liner of Pipe. Pumps, Valves and tank. Wire, Cable, Joint, Bearing. Film, Semiconductor etc.
CAS No: 9002-84-0 Average particle size: 450-750 μm, Melt Point: 327±5℃, Application: Flim, Tube, Wire & cable, Teflon Seal Tape, Coaxial cable, Hose, Electrical tape, Sleeving
CAS No: 9002-83-9 Long-term working temperature: -196°C to 125°C Application: Tablet Sheets, Sheet, Seals, Gasket, Aerospace, Medical, liquid nitrogen valve linings
CAS No: 25067-11-2 Melting point: 213°C Application: Valve, Pump and Pipe liner, Cable, Wire, Spark wire, ignition wire, Pipe, Tube, Film, Semiconductor
Whether you’re interested in our products, need a quote, or have any other requirements, we look forward to hearing from you. And you will get a perfact solution.
Peflon Provides a one-step Polymer Solution.
We will contact you within 1 working day, please pay attention to the email with the suffix “@peflon.com”.
EN 
EN
ES 
KO 
DE 
TR